The Wireless-N WiFi repeater consists of different LED lights. These lights determine the status of the performance of the repeater. When the LED light is solid, it signifies that everything is working fine. Whereas if it is off or keeps blinking, you need to address the matter. No worries, this article will put an end to the worry of a lot of users who have performed Wireless-N WiFi repeater setup and the LED light on their device keeps blinking. So, read on.
Fixed: LED on Wireless-N Repeater Keeps Blinking
Give a Break to the Repeater
Perhaps, your Wireless-N WiFi repeater is overworking due to which it has fallen a victim to technical glitches. Thus, the time has come to get rid of technical glitches by giving a break to your Wireless-N repeater. No other idea can be better than rebooting the repeater.
So, unplug your repeater from the wall socket, wait for some time, and plug it back into its respective wall outlet. Now, check whether the LED light on your Wireless-N repeater has become stable or not. If not, look at the next tip.
Bring Repeater Close to Router
The LED light on your Wireless-N WiFi repeater might also blink if it is not getting proper signals from the router. Therefore, you need to reduce the distance between both WiFi devices. But, make sure not to stick them as it can lead to a clash of their signals.
In case you love wires and have connected your devices using an Ethernet cable, then ensure that the cable used for connecting your WiFi devices is not damaged. Also, check for the firmness of the wired connection.
Update the Firmware
Chances are that the firmware of your Wireless-N WiFi repeater has become outdated. Know that an outdated firmware of your repeater does nothing but degrades its performance and leads you to issues similar to the one that you are already facing. Thus, update the firmware by accessing the WiFi repeater login page.
For this, log in to your repeater, find the Web Upgrade tab and upload the latest firmware file of your repeater. However, you need to be very careful during the firmware update process and upload the correct file. Besides, do not halt the process by switching tabs on the web browser or turning off your WiFi repeater.
Relocate the Repeater
Is the LED light on your WiFi repeater still blinking? It looks like you haven’t selected the correct location for your WiFi repeater. FYI, during and after the WiFi repeater setup your device must be located at an ideal location.
An ideal location for the repeater is one that is away from WiFi interference. WiFi interference creating objects and devices include cellular phones, televisions, radios, refrigerators, microwave ovens, mirrors, fish tanks, metal doors, etc.
Reset the Repeater
If nothing has worked in your favor till now, then your repeater might be improperly configured. Therefore, it’s high time that you restore your WiFi repeater to the factory default mode. It will allow you to set up the repeater again.
For this, press the Reset button on the repeater carefully. As soon as the repeater resets, set it up by accessing the Wireless N WiFi repeater login page.
This was all about what to do if the LED light on your Wireless-N WiFi repeater keeps blinking. We hope that the tips and tricks discussed above will help you in resolving the problem you were facing and return your repeater to its normal working state. If yes, then do leave a word of appreciation in the comment box.